What is the use of stainless steel flange

　　Stainless steel flange is a kind of disc shaped parts, in the pipeline project is the most common, the flange is used in pairs. In pipe engineering, stainless steel flange is mainly used for pipe connection. In the need to connect the pipe, a variety of installation of a flange plate, low pressure pipe can be used wire connection flange, 4 kg or more pressure on the use of welding flange. Between the two pieces of flange and the sealing point, and then tighten the bolts. Different pressure flange have different thickness and use different bolt. Pumps and valves, in connection with the pipe, the parts of the equipment, but also made corresponding to the flange shape, also known as the flange connection. Usually in the two plane around the use of bolts connected to the same time closed connection parts, generally referred to as the "flange", such as the connection of ventilation ducts, such parts can be referred to as "flange type parts". But this connection is only a part of the equipment, such as the flange and the water pump connection, it is not good to pump called "flange type parts". Relatively small, such as valves, can be called "flange type parts".

　　Main uses are:

　　1. Connect the line and keep the sealing performance;

　　2, to facilitate the replacement of a section of the pipeline;

　　3, easy to open and check the pipeline situation;

　　4, to facilitate the closure of a certain section of the pipeline.